- P-ISSN 1225-0163
- E-ISSN 2288-8985
- P-ISSN1225-0163
- E-ISSN2288-8985
- SCOPUS, ESCI, KCI
Article Detail
Home > Article Detail
The TVOC management level evaluation of adhesive product following to simultaneous revision of indoor air quality testing methods and standards
Analytical Science and Technology / Analytical Science and Technology, (P)1225-0163; (E)2288-8985
2010, v.23 no.3, pp.255-260
https://doi.org/10.5806/AST.2010.23.3.255
&
(2010). The TVOC management level evaluation of adhesive product following to simultaneous revision of indoor air quality testing methods and standards. , 23(3), 255-260, https://doi.org/10.5806/AST.2010.23.3.255
Abstract
The Ministry of Environment simultaneously revised testing methods and emission standards of adhesives product on the 『Law of indoor air quality management』 for the effective management of the building materials releasing pollutants in great quantities. Accordingly, it is impossible to compare original standards with revised standards directly. The influences of each factor of the revised testing methods of adhesive product on the emission rate of pollutants are reviewed through comparing with the original testing method. Through this study, revised pollutant emission control standards were assessed. With the result that it is found that emission rate of adhesives product is weakened two and half times by changing test period and the emission rate resulting from changing drying time has little difference. As a result of comparing TVOC emission standards with the original testing method considering the modification of testing methods, it is found that the emission standard through this revision is strengthened about 2.1 times more than that of present testing method.
- keywords
- adhesives, small chamber, TVOC, building materials
Other articles from this issue
- Characterization of Fe-ACF/TiO2 composite and photocatalytic activity for MB Solution under visible light
- Fabrication of ordered porous nanocomposite materials using templating
- Determination and preconcentration of Cu(II) using microcrystalline p-Dichlorobenzene loaded with salicylaldoxime
- Estimation on the application of Reference Materials for PCBs Proficiency Testing from the transformer oil
- The TVOC management level evaluation of adhesive product following to simultaneous revision of indoor air quality testing methods and standards
- Assessment of PCBs-containing solid wastes using official wastes test method
- Distribution and emission source of PAHs in ambient air of Seoul
- Comparison of three analytical methods for PCBs-containing liquid wastes
- Evaluation of the proficiency testing results using river water-based reference materials for heavy metal analysis
- Preparation of wastewater-based reference materials for heavy metal analysis and interlaboratory study
- The study of nondestructive evaluation method of paper records materials by NIR spectroscopy
- Distribution and exposure assessment of indicator PCBs in Food
- Analysis of rifle and pistol primer gunshot residue using SEM-EDX
- more
Recommanded Articles
This website recommended the use the Chrome browser for journal website.