활성탄소섬유의 미세기공 분석 및 흡착특성
Micropore Analysis and Adsorption Characteristics of Activated Carbon Fibers
분석과학 / Analytical Science and Technology, (P)1225-0163; (E)2288-8985
2000, v.13 no.1, pp.89-95
문동철
이광호
김창수
김도형
김미란
신채호
박일영
남성열
이창기
문동철,
이광호,
김창수,
김도형,
김미란,
신채호,
박일영,
남성열,
&
이창기.
(2000). 활성탄소섬유의 미세기공 분석 및 흡착특성. , 13(1), 89-95.
초록
식물섬유, 합성섬유 및 혼합섬유를 원료로 하여 3등급의 활성탄소섬유를 제조하고 미세기공 및 세공특성을 검토하였다. 제조한 활성탄소섬유의 흡착등온선은 모두 $20{\AA}$ 이하의 기공크기를 나타내는 Type I을 보였으며 미세기공 직경은 $5.6{\pm}0.3{\AA}$ 이내에서 최대 분포를 나타냈다. 활성탄소섬유의 질소 또는 아르곤 흡착에 의한 비표면적($S_{BET}$), 산화율, 액상 요오드흡착에 대한 상관 관계를 조사한 결과 비표면적이 $1600m^2g^{-1}$까지는 비표면적의 증가와 액상 요오드흡착량이 직선 관계를 나타냈으나 그 이상의 비표면적에서는 요오드 흡착량이 낮은 결과를 보이고, 비표면적이 증가할수록 제품의 burn-off가 크게 나타났다.
- keywords
-
Activated Carbon Fiber (ACF),
micropore analysis,
adsoprtion characteristics,
Type I isotherm,
BET surface area,
Adsorption capacity of iodine,
burn-off
Abstract
Three grades of activated carbon fibers (ACFs) were prepared from various precursors of plantic, synthetic, and mixed fabrics of viscose rayon and cotton. The ACFs an exhibited type I isotherms on the adsorption of nitrogen or argon. Micropore analysis revealed that the ACFs have uniform micropore size distribution in which their peak diameters were in the range of $5.6{\pm}0.3{\AA}$. The BET surface area of ACFs up to $1600m^2g^{-1}$ was proportional to the adsorption capacity of iodine. The BET values of the ACFs prepared were proportional to the burn-off degree of the products.
- keywords
-
Activated Carbon Fiber (ACF),
micropore analysis,
adsoprtion characteristics,
Type I isotherm,
BET surface area,
Adsorption capacity of iodine,
burn-off