여러 가지 모노머와 첨가제를 가지고 전기환원법에 의해 제조된 폴리실란의 반응속도
The reaction rate of polysilanes prepared by eledtroreduction with dirrerent monomers and additives
분석과학 / Analytical Science and Technology, (P)1225-0163; (E)2288-8985
2008, v.21 no.5, pp.432-437
장봉군
(안휘건축대학, 한서대학교)
진명량
(한서대학교 신소재공학과)
오원춘
(한서대학교)
장봉군,
진명량,
&
오원춘.
(2008). 여러 가지 모노머와 첨가제를 가지고 전기환원법에 의해 제조된 폴리실란의 반응속도. , 21(5), 432-437.
초록
본 연구에서 초음파 조사하에서 Mg 전극을 사용하여 $CH_3HSiCl_2$, $PhSiCl_3$, $CH_3SiCl_3$ 및 $(CH_3)_2SiCl_2$와 같은 여러 가지 모노머를 가지고 전기환원법에 의하여 폴리실란을 합성하였다. 또한 반응속도에 있어서 모노머와 첨가제 (p-dibromobenzene (DBB), naphthalene (NAPH) 및 anthracene (ANTH))의 효과를 연구하였다. 네 종류의 모노머중에서 $PhSiCl_3$의 고분자화 반응은 아주 높은 반응속도를 보였다. 또한, p-dibromobenzene(DBB)는 가장 좋은 첨가제로 입증되었다. 이들 관찰에 근거하여 이들의 고분자화 반응에서 가능한 반응 메커니즘을 제시하였다.
- keywords
-
polysilane,
electroreduction,
reaction rate,
monomers,
additives
Abstract
In this study, polysilanes were synthesized by electroreduction with different monomers such as
CH3HSiCl2, PhSiCl3, CH3SiCl3 and (CH3)2SiCl2 by Mg electrodes under ultrasonic radiation. The effects of
monomers and additives (p-dibromobenzene (DBB), naphthalene (NAPH) and anthracene (ANTH)) on the reaction
rate were investigated. Polymerization of PhSiCl3 among the four monomers showed the highest rate. pdibromobenzene
(DBB) was proved the most effective additive. Based on the observations, some possible reaction
mechanisms of the polymerization were proposed.
- keywords
-
polysilane,
electroreduction,
reaction rate,
monomers,
additives