- P-ISSN 1225-0163
- E-ISSN 2288-8985
- P-ISSN1225-0163
- E-ISSN2288-8985
- SCOPUS, ESCI, KCI
Article Detail
Home > Article Detail
Analytical study on nickel content in ceramic, metal and plastic materials
Analytical Science and Technology / Analytical Science and Technology, (P)1225-0163; (E)2288-8985
2011, v.24 no.6, pp.443-450
https://doi.org/10.5806/AST.2011.24.6.443
(2011). Analytical study on nickel content in ceramic, metal and plastic materials. , 24(6), 443-450, https://doi.org/10.5806/AST.2011.24.6.443
Abstract
Quantitative analytical condition for nickel in ceramic, metal and plastic materials using complexation and solvent extraction followed by inductively coupled plasma-atomic emission spectrometry (ICP-AES) and atomic absorption spectrophotometry (AAS) was studied. Ceramic, metal and plastic samples were dissolved by acid digestion. Nickel was determined by ICP-AES and AAS after extraction of Ni (DMG)_2 in CHCl_3. Recovery efficiency of nickel was satisfactory, and most of matrix elements causing interference could be effectively eliminated by the separation. Nickel in the certified reference materials (BAM-376 and PACS-2)were quantitatively determined without influence of sample matrix.
- keywords
- nickel, chelation, dimethylglyoxime, solvent extraction, ICP-AES, AAS
Other articles from this issue
- Chip-based microcapillary HPLC for proteomic analysis
- Investigation on the techniques of quality control for radiation counting systems
- Analysis of volatile aroma compounds from vanilla perfume using headspace disk type monolithic material sorptive extraction
- Development of wet-sampler for collection and fractionation of micron-sized particles
- Evaluation of the proficiency testing results for brominated flame retardants in high impact polystyrene
- Analytical study on nickel content in ceramic, metal and plastic materials
- Photoluminescence properties of eight coordinated terbium(III) complexes
- A solid-state NMR study on the activity of an antimicrobial peptide, magainin 2
- Solubility of carbon dioxide in ionic liquids with methylsulfate anion
- The analytical study on synthesis and purification of high purity ionic liquid, 1-ethyl-3-methylimidazolium tetrafluoroborate
- Analysis of 2,3,7,8-substituted PCDDs, PCDFs, and DL-PCBs in muscle of crucian carp (Carassius auratus and Carassius cuvieri) from major rivers and lakes
- The characteristics of Mn-TiO_2 catalyst for visible-light photocatalyst
- Results of round robin test for specific surface area
- Acoustic technology-assisted rapid proteolysis for high-throughput proteome analysis
- Real-time monitoring for blending uniformity of trimebutine CR tablets using near-infrared and Raman spectroscopy
- Analysis of calmodulin binding property of IQ motifs of IQGAP1
- 2D-QSAR analysis for hERG ion channel inhibitors
- Prediction and analysis of acute fish toxicity of pesticides to the rainbow trout using 2D-QSAR
- more
Recommanded Articles
This website recommended the use the Chrome browser for journal website.